Vaisala RS92-KL Manuel d'utilisateur télécharger pdf (Page 28)

User's Guide ______________________________________________________________________

26 __________________________________________________________________ M210299EN-D

7. When the DigiCORA® sounding software is finished, the message

"Ready for sonde release" appears on the display. Remove the

radiosonde from the Ground Check Set and disconnect the

communication cable.

8. The back of the radiosonde facing you, press the sensor boom

gently forward with your thumbs until the plastic clips on both

sides click and the sensor boom sits firmly in the bended position.

0710-108

Figure 15 Placing the Sensor Boom into Flight Position

The sensor boom is now in the flight position and remains so

throughout the sounding.

NOTE

The timer countdown is different for analog (RS92-K and RS92-KL)

and digital radiosondes (for example, RS92-SGP): For analog

radiosondes, the timer countdown starts on the ground, beginning

when the radiosonde is connected to the Ground Check Set. Therefore,

you have to add some extra time to the timer to be able to activate and

connect the battery and launch the radiosonde. For digital radisondes,

the timer countdown starts from launch detect, and, therefore, no extra

time is required.

CAUTION

Only touch the bottom of the boom. Do not touch or hit the sensors.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 44 45

Pas de commentaire

Vaisala RS92-KL Manuel d'utilisateur Page 28