Vaisala RS92-SGP Guide de l'utilisateur télécharger pdf (Page 36)

User's Guide ______________________________________________________________________

34 ___________________________________________________________________ M210295EN-J

7. Press the red switch on the battery case to activate the battery. The

green LED next to the red switch is lit, indicated with an arrow in

Figure 26 on page 34. Make sure the LED stays lit.

Figure 26 Green LED Light is Lit

If the LED is not lit, see the instructions in section Checking the

Connection on page 34.

8. Check from the sounding system software that the telemetry link is

working well. For detailed instructions on using the sounding

software, refer to the sounding system documentation.

Checking the Connection

If the LED is not lit when you press the switch, the battery connector

may not be properly connected to the connector holder in the battery

case. To check this, do the following:

1. Remove the radiosonde and the battery case from each other, for

example using a small coin. See section Removing the Battery

Case on page 35 for details.

2. Connect the battery again carefully following the instructions in

section Connecting the Dry-cell Battery Set with Switch on page

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 53 54

Pas de commentaire

Vaisala RS92-SGP Guide de l'utilisateur Page 36