Chapter 3 _______________________________________________________________ Installation
VAISALA_______________________________________________________________________ 17
0702-001
Figure 5 WAC155 Component Board
Connections
The WAC155 transmitter provides the line cable entry through a gland
for a cable with a diameter from 7 to 10 mm. For better protection
against RF interference, bend the cable shield as illustrated in Figure 6
on page 17.
0206-046
Figure 6 Cable Shield Bent over the Plastic Sleeve and O-ring
The WAC155 transmitter has three I/O connectors as shown in
Figure 7 on page 18. For the location of the connectors and the routing
of the cables through the cable glands, refer to Figure 8 on page 20.
The following numbers refer to Figure 5 on page 17.
1 = RS-485 termination jumper
2 = Status indicator LED
Commentaires sur ces manuels