Vaisala RS92-SGP Manuel d'utilisateur télécharger pdf (Page 28)

User's Guide ______________________________________________________________________

26 __________________________________________________________________ M210295EN-H

2. Connect the communication cable to the Ground Check Set

interface in the radiosonde. Text "UP" on the connector faces

upwards.

0705-026

Figure 14 Radiosonde in the GC25 with the

Communication Cable Connected

3. Switch on the PC and start a new sounding with the sounding

system software. For detailed instructions, see the sounding system

documentation.

4. Switch on the Ground Check Set by pressing the power switch. The

green LED in the power switch is lit.

The sounding software goes through reconditioning, frequency

tuning, timer setting, and ground checking.

5. When the sounding software is finished, it indicates that it is ready

for radiosonde release dy displaying a message. Remove the

radiosonde from the Ground Check Set and disconnect the

communication cable.

CAUTION

Do not press any buttons in the Ground Check Set while the sounding

software is performing.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 57 58

Pas de commentaire

Vaisala RS92-SGP Manuel d'utilisateur Page 28