Vaisala DPT145 Guide de l'utilisateur télécharger pdf (Page 25)

Chapter 4 ________________________________________________________________ Installation

VAISALA ________________________________________________________________________ 25

Installation With Weather Shield

1. When DPT145 is ordered with the weather

shield, the transmitter is delivered already

attached to the shield.

If you have ordered the weather shield

separately, attach the transmitter to the

weather shield before continuing this

procedure. Fit the clamp of the weather

shield over the adapter, not the transmitter

body. For ABB Malmkvist and Alstom

G1/2" type adapters, place the clamp over

the notches in the adapter.

2. Use an 8 mm box-end wrench to loosen

the four bolts that hold the weather shield

cover. Remove the cover.

It is not necessary to remove the bolts,

they can remain in place during

installation.

3. Remove the yellow transport protection

plug. Make sure the surfaces are clean and

dry.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 62 63

Pas de commentaire

Vaisala DPT145 Guide de l'utilisateur Page 25