Vaisala HUMICAP DMT132 Guide de l'utilisateur télécharger pdf (Page 48)

USER'S GUIDE____________________________________________________________________

46 __________________________________________________________________ M211289EN-A

View User Adjustment Parameters

Use the L command to view the current user adjustment parameters that

are affected by the

CRH, RHCAL, CT, and LI commands. This

command is useful for checking the currently applied correction.

L<cr>

The output values are as follows:

- Cp offset and gain: capacitance, adjusted using the

CRH command.

- RH offset and gain: adjusted using the

RHCAL command.

- T offset and gain: adjusted using the

CT command.

Example (shows default values, no user adjustment done):

Cp offset : 0

Cp gain : 1

RH offset : 0

RH gain : 1

T offset : 0

T gain : 1

Set User Adjustment Parameters

Use the LI command to set the user adjustment parameters directly. This

command is useful for restoring the desired adjustments, and removing

the effects of user adjustment without having to perform the factory reset.

LI<cr>

After entering the command, you will be prompted to enter new values

one at a time. Press ENTER without giving a value to move to the next

parameter.

Example (shows default values):

>li

Cp offset : 0 ?

Cp gain : 1 ?

RH offset : 0 ?

RH gain : 1 ?

T offset : 0 ?

T gain : 1 ?

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 73 74

Pas de commentaire

Vaisala HUMICAP DMT132 Guide de l'utilisateur Page 48