Vaisala PTU300 Guide de l'utilisateur télécharger pdf (Page 94)

USER'S GUIDE____________________________________________________________________

92 __________________________________________________________________ M210796EN-E

Formatting Serial Line Message

FTIME and FDATE

FTIME and FDATE commands will enable/disable output of time and

date to the serial line. To add time to R and SEND outputs enter:

FTIME [x]

To add date to R and SEND outputs enter:

FDATE [x]

where

x = ON or OFF

Example:

>send

RH= 98.4 %RH T= 31.0 'C

>ftime on

Form. time : ON

>send

03:47:59 RH= 98.4 %RH T= 31.0 'C

>fdate on

Form. date : ON

>send

2004-07-05 03:48:03 RH= 98.4 %RH T= 31.0 'C

General Settings

Changing Quantities and Units

Use serial commands or the optional display/keypad to change quantities

and units. For more information on available quantities and units, see

Table 4 on page 19. For more information on optional quantities, see

Table 5 on page 19.

NOTE

Only the quantities selected when ordering the device can be selected as

a display output quantity.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 185 186

Pas de commentaire

Vaisala PTU300 Guide de l'utilisateur Page 94