Vaisala WXT520 Manuel d'utilisateur télécharger pdf (Page 18)

Appendix A. Configuring the WXT520

6. Go to the Device Settings Screen and enter the settings for each of the

parameters (see FIGURE A-2). Default settings are:

• Device—Address: 0

• Heating and self diagnostic—verify Enable Heating is NOT

selected.

• Heating and self diagnostics—Update Interval: 15 s

• Communication protocol—select SDI-12 v1.3

• User port settings—Port type: SDI-12, select continuous

measurements

FIGURE A-2. Device Settings screen

7. Click on the OK button.

8. Go to the Sensor Settings Screen (see FIGURE A-3). The default Wind

and PTU Update intervals are set to 5 s.

A-2

1 2 ... 13 14 15 16 17 18 19 20 21 22

Pas de commentaire

Vaisala WXT520 Manuel d'utilisateur Page 18