Vaisala MMT162 Manuel d'utilisateur télécharger pdf (Page 40)

User's Guide ______________________________________________________________________

38 __________________________________________________________________ M210934EN-C

Set Output Interval

Use the INTV command to set or display the output interval.

INTV [n xxx]<cr>

where

time interval = 0 ... 255

xxx

time unit = "S", "MIN", or "H"

Example:

intv 1 min

Output interval: 1 MIN

The shortest output interval (with n = 0) is approximately one second due

to the internal measurement cycle.

Output Reading Once

Use the SEND command to output the reading once in STOP mode.

The output format depends on which parameters the transmitter can

output.

SEND [aaa]<cr>

where

aaa

Transmitter address (0 ... 255). Must be specified if the

transmitter is in POLL mode, and a line has not been opened

using the OPEN command.

Example:

send

T= 25.2 'C aw= 0.299 H2O= 19 ppm RS= 29.9 %

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 65 66

Pas de commentaire

Vaisala MMT162 Manuel d'utilisateur Page 40