Vaisala HMM100 Manuel d'utilisateur télécharger pdf (Page 21)

Chapter 2 ___________________________________________________________ Product Overview

VAISALA ________________________________________________________________________ 19

Probe Mounting Clamp

The optional mounting clamp makes it easy to install the probe on the

wall of the measurement environment. The probe can be detached for

calibration simply by loosening the lower screw.

Installing the entire probe in the measurement environment prevents heat

conduction to the sensor, and is the recommended installation method.

To mount the HMM100 probe to the mounting clamp:

1. Align the slots on the clamp parts as shown in Figure 7 below.

1209-001

Figure 7 Aligning Mounting Clamp Slots

2. Slide the lower clamp part over to the bottom end of the upper part

as shown in Figure 8 below.

1209-002

Figure 8 Sliding the Lower Clamp Part

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 70 71

Pas de commentaire

Vaisala HMM100 Manuel d'utilisateur Page 21