Vaisala WHP25 Manuel d'utilisateur télécharger pdf (Page 11)

Chapter 3 __________________________________________________ Installation

VAISALA___________________________________________________________9

CHAPTER 3

INSTALLATION

This chapter provides you with information that is intended

to help you install WHP25 Mains Power Supply.

Installation Procedure

Before installation, route the input (AC) power cable near

the mast, which WHP25 Mains Power Supply will be

mounted to. Make sure you selected a pole mast with a

diameter from 99 to 105 mm for installation with the

standard mounting clamp.

To install the WHP25 unit, follow the procedure below.

1. Remove the four screws holding the cover of the

WHP25 unit. Remove the cover.

2. Attach the unit to the mast at a suitable place with the

provided accessories and the standard mounting clamp.

Refer to Figure 2 on page 10.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 26 27

Pas de commentaire

Vaisala WHP25 Manuel d'utilisateur Page 11