Vaisala WHP25 Manuel d'utilisateur télécharger pdf (Page 18)

User's Guide ________________________________________________________

16 _____________________________________________________ M210376en-A

NOTE

Total wire resistance of less than 0.3 Ω is recommended for

WA25 Wind Set.

Figure 8 on page 15 provides the wiring diagram for WA25

Wind Set mounted to WAC151 Cross Arm. When using the

standard power and signal cables ZZ45049 and ZZ45048,

the connections are the following:

1. For power supply, connect the YEL, GRN, and PNK

colored wires to the screw terminal #2 and the WHT,

BRN, and GRY colored wires to the terminal #3.

2. For signal output, connect wires GRN, YEL, WHT,

VIO, GRY, and PNK to terminals #7 to #12. For signal

grounding, connect BLK to the terminal #5.

3. For the optional sensor power input, connect BRN to

the terminal #6.

Installation with WAT12 and

WA25 Wind Set

Figure 9 on page 17 provides the wiring diagram for WA25

Wind Set mounted to WAT12 Analog Wind Transmitter.

NOTE

An expansion connector and discrete joining wires are

included in the WAA252 accessories.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

Pas de commentaire

Vaisala WHP25 Manuel d'utilisateur Page 18