Vaisala WMT700 Manuel d'utilisateur Page 67
- Page / 221
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Chapter 4 ________________________________________________________________ Installation
1306-140
Figure 25 Attaching Connector to WMT700
NOTE
You do not need to remove the cable tightening tool after tightening the
connector;
you can leave it in place.
6. Hold the wind sensor from the enclosure and slide the
sensor into the mounting kit. Turn the sensor so that the
mounting screw slides into the appropriate slot. Do not
touch the array when handling WMT700.
To avoid misalignment, turn the sensor until the screw
reaches the far end of the slot. When the screw is in the
position indicated with number 3 in Figure 26 on page 66 or
number 2 in Figure 27 on page 67, tighten the screw.
7. Remove the transportation damper protecting the array and
store it for future use.
8. Align WMT700. For instructions, see section Alignment on
page 74.
9. Connect the cable to the data acquisition system and power
supply. For instructions, see section Wiring on page 77.
WMT700 is now ready for operation.
VAISALA________________________________________________________________________ 65
- USER'S GUIDE 1
- Table of Contents 3
- CHAPTER 4 4
- CHAPTER 5 5
- APPENDIX E 8
- APPENDIX F 8
- APPENDIX G 8
- List of Figures 9
- List of Tables 11
- GENERAL INFORMATION 13
- Version Information 14
- Related Manuals 14
- Documentation Conventions 15
- Recycling 16
- Regulatory Compliances 17
- Trademarks 18
- Warranty 18
- PRODUCT OVERVIEW 19
- 1003-005 20
- 1104-065 21
- 1104-064 22
- 1305-001 23
- 1305-002 23
- 1305-003 24
- 1305-004 24
- Ordering Options 25
- Heating 26
- Digital Communication Units 27
- Channel 29
- Connection Cables 29
- Mounting Adapters 30
- Accessories 30
- Bird Cage 33
- WM Verifier 34
- Table 17 Cables 35
- Cable Tightening Tool 36
- FUNCTIONAL DESCRIPTION 37
- 1005-007 38
- )t/1(1/tL5.0V 39
- Calculations 40
- 0212-044 41
- Scalar Averaging 42
- Vector Averaging 43
- Measurement Methods 44
- Serial Communication 47
- Protocols 49
- 1001-111 50
- Serial Interface Timing 51
- Analog Output 52
- Figure 18 Frequency Output 53
- Analog Output Scaling 54
- Missing Readings and Error 57
- Indication 57
- INSTALLATION 59
- 1001-016 61
- Installation Procedure 64
- Mounting 65
- 1306-029 66
- 1306-140 67
- 1006-077 68
- 1006-078 69
- 1006-079 71
- 1006-080 72
- 1306-033 73
- 1103-054 74
- Alignment 76
- Installing Bird Cage 77
- 1104-086 78
- 1009-016 81
- Connector Signals 83
- Heated Transducers and Arms 85
- Powering 86
- 1301-017 87
- 1104-054 88
- 1104-055 88
- Heating Power 89
- CAUTION 90
- 1104-081 93
- 1104-082 94
- 1104-083 95
- Before You Start 96
- Mounting Procedure 98
- Tightening Connector 99
- WARNING 100
- Using Standard WMT700 Cables 101
- WS425 Analog Output Signals 106
- OPERATION 109
- Configuration 112
- Parameter Handling Commands 113
- S — Set Parameter 114
- G — Get Parameter 115
- Set Port Settings 116
- Display Port Settings 116
- START — Start Continuous 117
- Measurement 117
- STOP — Stop Wind Measurement 117
- ERRORS — Get Error Codes and 118
- Information Commands 119
- Configuration Parameters 120
- Configuring Data Messages 121
- Data Messages 122
- Status Flags 125
- Operating WMT700 128
- WMT700 Data Message 21 131
- WMT700 Data Message 22 131
- WMT700 Data Message 23 132
- WMT700 Data Message 24 133
- WMT700 Data Message 25 134
- Missing Readings 135
- Error Indication 136
- Measurement Mode Commands 137
- MEAS — Start Measurement 138
- POLL — Poll Data 139
- SLEEP — Enter Low-Power Mode 139
- @a M 12<CR><LF> 140
- Output Mode 141
- Output Operation Mode 142
- Wind Speed Output 143
- Voltage 144
- Wind Direction Output 145
- S aout1minv,0.1 146
- S aout1maxv,5 146
- S aout1err,1 146
- Profiles 147
- Communication Profiles 147
- Entering Configuration Mode 149
- WS425 F/G ASOS Profile 150
- WS425 F/G ASOS Commands 151
- Direction 152
- WS425 F/G ASOS Data Message 154
- WAP2131870503012.6014.7K99xx 155
- Configurable Parameters 156
- WS425 A/B NMEA Standard Data 157
- Message 157
- WS425 A/B NMEA Extended 159
- Commands 159
- WS425 A/B NMEA Extended Data 160
- WS425 A/B ASCII Profile 161
- WS425 A/B ASCII Commands 162
- WS425 A/B WAT11 Profile 165
- SDI-12 Profile (v 1.3) 167
- SDI-12 Commands 169
- ?! — Address Query 170
- SDI-12 Data Messages 178
- MAINTENANCE 181
- Periodic Maintenance 182
- Visual Inspection 182
- Cleaning 182
- Testing Proper Operation 183
- 1005-003 184
- TROUBLESHOOTING 185
- Error and Event Messages 187
- Technical Support 190
- Product Returns 190
- TECHNICAL DATA 191
- Table 62 Accessories 194
- Dimensions 195
- 1103-055 196
- COMPLETE COMMAND SET FOR 197
- TYPICAL SYSTEM ENVIRONMENTS 199
- 1003-052 200
- 1003-053 201
- 1004-001 202
- DEFAULT SETTINGS FOR 203
- DIFFERENT COMMUNICATION 203
- PROFILES 203
- CONFIGURATION PARAMETERS 207
- WMT700 NMEA MWV PROFILE 211
- WMT700 NMEA MWV Commands 213
- WMT700 NMEA MWV Data Message 214
- ACCESSORIES 215
- 1304-061 216
- CERTIFICATES 219
- *M211095EN* 221
Produits connexes et manuels pour Capteurs Vaisala WMT700
Capteurs Vaisala WMT700 Manuel d'utilisateur
(231 pages)
(231 pages)
© 2020, manymanuals.fr. Tous droits réservés | 1.272 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels