Vaisala GMP231 Manuel d'utilisateur télécharger pdf (Page 45)

Chapter 4 ____________________________________________________ Vaisala Industrial Protocol

VAISALA ________________________________________________________________________ 43

Set Calibration Info Text

Use the CTEXT command to view or set calibration information text.

CTEXT [text]<cr>

where

text

Calibration information text string, max 19 characters. If

you want to use spaces in the string, enclose the text in

quotes.

Example (shows the text “Calibrated at” followed by the currently stored

calibration text):

pass 1300

ctext

Calibrated at Vaisala

Example (set calibration text to “Lab_1”):

pass 1300

ctext Lab_1

Calibrated at Lab_1

Adjust Temperature Measurement

Use the CT command to perform an offset correction to the internal

temperature measurement. The correction is done by providing the

correct temperature as an argument to the CT command.

CT [temp]<cr>

CT [-reset]<cr>

where

temp

Correct temperature in degrees Celsius (°C).

Example (adjust the internal temperature measurement to 23 °C at the

current conditions):

pass 1300

ct 23

Example (clear the offset adjustment from internal temperature

measurement):

pass 1300

ct -reset

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 89 90

Pas de commentaire

Vaisala GMP231 Manuel d'utilisateur Page 45