Vaisala Calibration of Digital Transmitters with HMI41 Manuel d'utilisateur télécharger pdf (Page 12)

User's Guide ______________________________________________________________________

10 __________________________________________________________________ M210777EN-B

These are also the factory settings of the HMP230 series. If the values

on the HMI41 display do not correspond to those of the HMP230

series transmitter, change them with buttons ▲ and ▼ until they are

correct, press ENTER and then ON/OFF. With the HMT100 and

HMT330, use N, 8, 1:

N = none parity

8 = data bits

1 = stop bits

These selections are stored in the HMI41 memory; when HMI41 is

turned on again, it will automatically wake up as a calibrator for

digital transmitters with these line settings. If you wish to calibrate

transmitters with different settings, or use HMI41 as an indicator or as

a calibrator for some other transmitter type, these selections have to be

made accordingly; refer to corresponding manuals for further details.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Pas de commentaire

Vaisala Calibration of Digital Transmitters with HMI41 Manuel d'utilisateur Page 12