Vaisala DPT145 Guide de l'utilisateur télécharger pdf (Page 26)

User's Guide _______________________________________________________________________

26 ___________________________________________________________________ M211371EN-D

4. Install the transmitter to the mechanical

coupling and tighten by hand. Try to keep

the weather shield level.

5. Use a wrench to tighten the connection.

Turn from the adapter, not from the

transmitter body!

Use sufficient force to achieve a tight

installation. The system must be leak-free

for accurate measurement.

If the weather shield is tilted after the

installation, you can straighten it by

loosening

the two nuts that keep the clamp

tight. Tighten the nuts after weather shield

is straight.

Note: The cable with the angled connector

has a fixed direction, and is designed to be

routed straight down from port II. If you

rotate the transmitter inside the weather

shield, or if you have the Alstom G1/2"

type adapter, you may have to use a cable

with a straight connector.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 62 63

Pas de commentaire

Vaisala DPT145 Guide de l'utilisateur Page 26