Vaisala CARBOCAP GMT220 SERIES Guide de l'utilisateur télécharger pdf (Page 23)

Chapter 4 _______________________________________________________Serial Communication

VAISALA _______________________________________________________________________ 23

Temperature Setting

The ambient temperature value can be set by using the following

command:

MF_TEMP xxx<cr>

where: xxx = ambient temperature (C) x 10.

Example of setting desired temperature (25 C):

>MF_TEMP 250

MF_TEMP=250

Save the settings:

MAIN_SAVE F<cr>

Display Setting

The display operation mode, display accuracy and probe temperature can

be set by using the following command:

MF_DMODE x<cr>

where: x = 0 (zero)/1/2/3/7/8/9

0= no display

1= ppm-reading with one decimal

2= %-reading with two decimals

3=reading with no decimals

7=ppm-reading with no decimal

8= ppm-reading with 10 ppm accuracy

>mf_dmode 7

MF_DMODE=07 00 00 00 00

Save the settings:

MAIN_SAVE F<cr>

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

Pas de commentaire

Vaisala CARBOCAP GMT220 SERIES Guide de l'utilisateur Page 23