Vaisala WXT510 Manuel d'utilisateur

WXT510 Weather TransmitterRevision: 4/07Copyright © 2006-2007Campbell Scientific, Inc.

WXT510 Weather Transmitter Alias WXT510(6)=Wsmax Alias WXT510(7)=airtemp Alias WXT510(8)=relhumidity Alias WXT510(9)=airpressure Alias WXT510(10)=Ramo

Appendix A. Configuring the WXT510 Modifying the default configuration of the WXT510 requires the purchase of a grey configuration cable; contact Ca

Appendix A. Configuring the WXT510 6. Go to the Device Settings Screen and enter the settings for each of the parameters (see Figure A-2). Default

Appendix A. Configuring the WXT510 9. Click on the OK button. 10. Go to the Message Settings Screen and verify that Message Settings are as desired

Appendix A. Configuring the WXT510 This is a blank page. A-4

This is a blank page.

Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com info@campbells

Warranty and Assistance The WXT510 WEATHER TRANSMITTER is warranted by CAMPBELL SCIENTIFIC, INC. to be free from defects in materials and workmanship

WXT510 Table of Contents PDF viewers note: These page numbers refer to the printed version of this document. Use the Adobe Acrobat® bookmarks tab fo

WXT510 Table of Contents Table 1. Connections to Campbell Scientific Dataloggers... 4 ii

WXT510 Weather Transmitter 1. General Description The WXT510 Weather Transmitter, manufactured by Vaisala, measures wind speed and direction, precipi

WXT510 Weather Transmitter 2.2 Wind Direction Measurement Range: 0° to 360° Accuracy: ±3° 2.3 Precipitation Rainfall: cumulative accumulation aft

WXT510 Weather Transmitter FIGURE 1. Opened WXT510 with the PTU at the right. FIGURE 2. A WXT510 with the PTU inserted inside of it. 3

WXT510 Weather Transmitter 3.2 Mounting to a Campbell Scientific Crossarm The WXT510 is mounted on a CM202, CM204, or CM206 crossarm via the 18311 mo

WXT510 Weather Transmitter 23: Excitation with Delay (P22) 1: 1 Ex Channel 2: 0 Delay W/Ex (0.01 sec units) 3: 50 Delay After Ex (0.01