Vaisala DRYCAP DMT345 Guide de l'utilisateur télécharger pdf (Page 80)

USER'S GUIDE____________________________________________________________________

80 __________________________________________________________________ M210762EN-D

0802-110

Figure 52 Entering Network SSID

6. To change the currently selected Network type, select the Type

entry and press the Change button. Select the new type from the

list and press the Select button.

0802-112

Figure 53 Selecting the Wireless Network Type

7. If you have selected an encrypted network type (WEP or WPA),

you must enter the security key to be used. Select the

Key/passphrase entry and press the Set button. Enter the key in

the same way as the SSID, and press the OK button. With the WEP

encryption you must enter the encryption key in hexadecimal (10

hexdecimals for 64-bit encryption or 26 hexadecimals for 128-bit

encryption). A WPA key must be 8 … 63 ASCII characters.

8. After setting the wireless network parameters, press the Exit button

in the Wireless Network Settings menu. You will be asked to

confirm the new settings. Note that when new settings are saved,

all currently active WLAN connections are disconnected.

Using Serial Line

Use the serial line command WLAN to view or set the wireless network

settings. If you set an encrypted network type, you will be asked to enter

the security key. With the WEP encryption you must enter the encryption

key in hexadecimal (10 hexdecimals for 64-bit encryption or 26

hexadecimals for 128-bit encryption) or with plain ASCII characters (5

characters for 64-bit encryption or 13 characters for 128-bit encryption).

A WPA key must be 8 … 63 ASCII characters.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 156 157

Pas de commentaire

Vaisala DRYCAP DMT345 Guide de l'utilisateur Page 80