Vaisala Humicap HMW60U Guide de l'utilisateur télécharger pdf (Page 15)

Chapter 3 ____________________________________________________ Preparations Before Use

VAISALA _______________________________________________________________________ 13

CHAPTER 3

PREPARATIONS BEFORE USE

Installing and Recharging the Batteries

1. If you are using alkaline batteries, remove the back plate of the

indicator and insert the batteries. If the HM70 is ordered with a

rechargeable battery pack, it is already in place as shipped from

the factory.

2. Recharge the battery pack as follows: Plug in the recharger

connector to the base of the indicator and connect the recharger to

a wall socket. A battery symbol in the corner of the display starts

to roll.

- It is not recommended to use HM70 during the first recharging.

After the first charge cycle is complete, you can use the HM70

while recharging.

- The duration of recharging depends on the charge level of the

battery pack. 4 hours is a typical recharging time. The

recommended first charging time is 6 hours.

3. When the battery symbol stops rolling, the battery is fully

recharged. Disconnect the recharger.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 82 83

Pas de commentaire

Vaisala Humicap HMW60U Guide de l'utilisateur Page 15