Vaisala PTB330TS Guide de l'utilisateur télécharger pdf (Page 65)

Chapter 6 ______________________________ Serial Line Communication With PTB330 Barometer

VAISALA_______________________________________________________________________ 63

0812-022

Figure 25 Service Port on the PTB330 Motherboard

Installing the Driver for the USB Cable

Before taking the USB cable into use, you must install the provided

USB driver on your PC. When installing the driver, you must

acknowledge any security prompts that may appear. The driver is

compatible with Windows 2000, Windows XP, Windows Server 2003,

and Windows Vista.

1. Check that the USB cable is not connected. Disconnect the cable if

you have already connected it.

2. Insert the media that came with the cable, or download the driver

from www.vaisala.com.

3. Execute the USB driver installation program (setup.exe), and

accept the installation defaults. The installation of the driver may

take several minutes.

4. After the driver has been installed, connect the USB cable to a USB

port on your PC. Windows will detect the new device, and use the

driver automatically.

5. The installation has reserved a COM port for the cable. Verify the

port number, and the status of the cable, using the Vaisala USB

Instrument Finder program that has been installed in the Windows

Start menu.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 88 89

Pas de commentaire

Vaisala PTB330TS Guide de l'utilisateur Page 65