Vaisala PTU300 Guide de l'utilisateur télécharger pdf (Page 75)

Chapter 4 ________________________________________________________________ Operation

VAISALA _______________________________________________________________________ 73

Setting time and date

TIME and DATE

To set time enter the TIME command. To set date enter the DATE

command.

TIME

DATE

These time and date settings are shown on the timestamps of PLAY

command. When you want to include time and date in the R and

SEND commands, use the FTIME and FDATE commands.

Example:

>TIME

Current time is 04:12:39

Enter new time (hh:mm:ss) ? 12:24:00

>DATE

Current date is 2000-01-01

Enter new date (yyyy-mm-dd) ? 2004-07-05

NOTE

Time and date are cleared to 2000-01-01 00:00:00 at reset or at power

failure.

General Settings

Changing Quantities and Units

Use serial commands or the optional display/keypad to change

quantities and units. For more information on available quantities and

units, see Table 2 on page 15. For more information on optional

quantities, see Table 3 on page 15 .

NOTE

Only the quantities selected when ordering the device can be selected

as a display output quantity.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 172 173

Pas de commentaire

Vaisala PTU300 Guide de l'utilisateur Page 75