Vaisala MMT310 Manuel d'utilisateur télécharger pdf (Page 43)

Chapter 4 _________________________________________________________________ Operation

VAISALA ________________________________________________________________________ 43

Set Time and Date

Syntax: TIME<cr>

Syntax: DATE<cr>

Sets the time and date to the transmitter.

Example:

>time

Current time is 04:12:39

Enter new time (hh:mm:ss) ? 12:24:00

>date

Current date is 2000-01-01

Enter new date (yyyy-mm-dd) ? 2013-06-30

NOTE

Time and date are cleared to 2000

-01-01 00:00:00 at reset.

NOTE

Only about 1 % accuracy is obtained with the software clock.

Add Time and Date to SEND and R

Outputs

Syntax: FTIME x<cr>

Syntax: FDATE x<cr>

Where

ON/OFF

The command enables or disables output of time and date to the serial

line.

>send

aw= 0.2 aw T= 31.0 'C

>ftime on

Form. time : ON

>send

03:47:59 aw= 0.2 aw T= 31.0 'C

>fdate on

Form. date : ON

>send

2000-01-01 03:48:03 aw= 0.2 aw T= 31.0 'C

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 80 81

Pas de commentaire

Vaisala MMT310 Manuel d'utilisateur Page 43