Vaisala DEWCAP DM500 Guide de l'utilisateur télécharger pdf (Page 64)

User's Guide ______________________________________________________________________

62 __________________________________________________________________ M210205EN-D

Response Speed

You can set the response speed to stable, normal (default) or fast. If

fast transients in the dewpoint prevent the system from reaching

balance, the signal can be stabilized by selecting the Stable response

speed. Fastest response time is achieved by setting the speed to Fast

but this may increase the noise in the dewpoint measurement. As a

rule of thumb, always use the fastest setting that gives stable readings!

1. Open MENU: press .

2. Select ►Measuring, press .

3. Select ►

Measurement settings, press .

4. Select

Response, press SET.

5. Select one of the following options:

Stable: Press SELECT to have the slowest response speed.

Normal: Press SELECT to have normal response speed.

Fast: Press SELECT to have fast response speed.

6. Press EXIT to return to the main view.

Pump ON/OFF

1. Open MENU: press .

2. Select ►

Measuring, press .

3. Select ►Measurement settings, press .

4. Select Pump, press ON/OFF.

5. Press EXIT to return to the main view.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 137 138

Pas de commentaire

Vaisala DEWCAP DM500 Guide de l'utilisateur Page 64