Vaisala DRYCAP DMT143 Guide de l'utilisateur télécharger pdf (Page 47)

Chapter 5 _________________________________________________________________ Operation

VAISALA ________________________________________________________________________ 45

Enable or Disable Analog Output

Use the AOUT command to enable or disable the analog output channel.

AOUT [ON/OFF]<cr>

Example (turn analog output off):

aout off

AOUT : OFF

Serial Line Output Commands

Start Measurement Output

Use the R command to start the continuous outputting of measurement

values as an ASCII text string to the serial line. The format of the

measurement message is set with the FORM command.

R<cr>

Example (measurement message in default format):

Tdf= 17.75 'F Tdfatm= -5.25 'F H2O= 954 ppm

Tdf= 17.23 'F Tdfatm= -5.72 'F H2O= 930 ppm

Tdf= 17.06 'F Tdfatm= -5.88 'F H2O= 922 ppm

Tdf= 16.97 'F Tdfatm= -5.96 'F H2O= 918 ppm

...

Outputting the results continues in intervals issued with the command

INTV until stopped.

Stop Measurement Output

You can stop the measurement output by pressing the ESC key.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 75 76

Pas de commentaire

Vaisala DRYCAP DMT143 Guide de l'utilisateur Page 47