Vaisala DRYCAP DMT143 Guide de l'utilisateur télécharger pdf (Page 51)

Chapter 5 _________________________________________________________________ Operation

VAISALA ________________________________________________________________________ 49

Set Measured Gas Type

Use the GAS command to set the type of gas that is measured.

GAS [type]<cr>

where

type

Measured gas type. Options are:

0 = air

1 = SF

Example (change currently measured gas from air to SF

gas

Gas : 0 ? 1

Set Measurement Filtering

Use the FILT command to view or set the speed at which the latest

measurement result is integrated into the output readings. The command

affects both analog output and serial line output.

FILT [a.aaa]<cr>

where

a.aaa

Range 0.001 ... 1.0.

1.0 = No filtering, latest

measurement is output

without averaging

0.5 = Average of last two measurements

0.1 = Average of ca. 16 measurements (default)

Example (show current setting):

filt

Filter : 0.100 ?

Example (set filtering to 0.5):

filt 0.5

Filter : 0.500

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 75 76

Pas de commentaire

Vaisala DRYCAP DMT143 Guide de l'utilisateur Page 51