Vaisala DRYCAP DMT345 Guide de l'utilisateur Page 54
- Page / 185
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
User's Guide _______________________________________________________________________
54 ___________________________________________________________________ M210762EN-G
1102-023
Figure 33 RS-422/485 Module
The following numbers refer to Figure 33 above:
1
=
Flat cable pins
2
=
Selection switches
3
=
Screw terminals for wiring
NOTE
The data lines on earlier versions of the RS-422/485 module are marked
A and B instead of D1+ and D0-. When the line is idle, D1+ has positive
voltage compared to D0-.
When connecting the module, be prepared to swap the D1+ and D0-
wires if you have a communication problem.
Installation and Wiring
1. Disconnect the power. In case the RS-422/485-module is installed
in the factory, continue with the item 4.
2. To attach the module, open the transmitter cover and fasten the
RS-422/485 module to the bottom of the housing with four screws.
3. Connect the flat cable between the RS-422/485 module and the
motherboard's pins MODULE1 (Communications).
4. Pull the network wirings through the cable gland.
5. Connect the twisted pair wires (1 or 2 pairs) to the screw terminals
as presented in Table 6:
1
2
3
- USER'S GUIDE 1
- Table of Contents 3
- CHAPTER 4 4
- CHAPTER 6 7
- CHAPTER 7 7
- CHAPTER 8 7
- APPENDIX C 8
- List of Figures 9
- List of Tables 11
- GENERAL INFORMATION 13
- Version Information 14
- Related Manuals 14
- Documentation Conventions 14
- ESD Protection 15
- Recycling 16
- Regulatory Compliances 16
- Patent Notice 17
- Trademarks 17
- Software License 18
- Warranty 18
- PRODUCT OVERVIEW 19
- Basic Features and Options 21
- Operating Principle 21
- Structure of the Transmitter 22
- 0604-006 23
- Probes and Cooling Set 24
- INSTALLATION 25
- 133 (5.24) 26
- 59 (2.32) 26
- Thickness 26
- 9.5 (0.37) 26
- 0604-011 27
- 0604-012 28
- 0604-013 29
- Pole or Pipeline 30
- Panel Mounting Frame 31
- 0704-002 32
- 0804-083 32
- DMT345 Probe Mounting 33
- 0604-020 34
- Parts of the Cooling Set 36
- Instructions 37
- 0604-024 38
- 0604-025 38
- Running 39
- Cable Bushings 40
- Cable Grounding 41
- WARNING 42
- CAUTION 44
- Optional Modules 45
- Installation 46
- Warnings 47
- Third Analog Output 50
- Installation and Wiring 51
- Alarm Relays 52
- RS-422/485 Interface 53
- 1102-028 56
- 1102-027 57
- LAN Interface 58
- WLAN Interface 59
- 0706-068 61
- 8-Pin Connector 62
- OPERATION 63
- Graphic History 65
- 0706-030 66
- Menus and Navigation 67
- Changing the Language 68
- Rounding Setting 68
- Display Backlight Setting 68
- Display Contrast Setting 69
- Keypad Lock (Keyguard) 69
- Factory Settings 70
- Display Alarms 71
- Configuring a Display Alarm 72
- Table 13 ALSEL Parameters 74
- Serial Line Communication 76
- User Port Connection 77
- Service Port Connection 78
- Using the Service Port 79
- LAN Communication 80
- Wireless LAN Configuration 83
- Communication Protocol 86
- Terminal Program Settings 87
- 0810-070 88
- 0810-071 89
- List of Serial Commands 90
- Table 26 Other Commands 92
- Outputting Reading Once 94
- FTIME and FDATE 96
- General Settings 97
- Example: 99
- Using Display/Keypad 101
- Using Buttons on Motherboard 101
- Using Serial Line 102
- Date and Time 103
- Data Filtering 104
- >filt ext 105
- Filter : EXT 105
- Device Information 106
- Resetting the Device 109
- Serial Output Settings 110
- Data Recording 114
- View Recorded Data 115
- Deleting Recorded Files 117
- Analog Output Settings 118
- Analog Output Quantities 119
- AMODE/ASEL 120
- Analog Output Tests 121
- Operation of Relays 123
- 1102-007 124
- Hysteresis 125
- 1102-040 126
- Enabling/Disabling Relays 127
- Indication Led Operation 127
- Setting Relay Outputs 127
- 0706-029 128
- Testing Operation of Relays 130
- Sensor Functions 131
- Sensor Purge 132
- 1103-067 133
- 1103-066 133
- Sensor Warming 135
- CHAPTER 5 137
- Taking Modbus into Use 138
- Enabling Serial Modbus 139
- Enabling Ethernet Modbus 140
- 1101-034 141
- 1101-036 141
- Diagnostic Modbus Counters 143
- Disabling Modbus 144
- MAINTENANCE 145
- Error States 146
- Table 33 Error Messages 147
- Technical Support 148
- Product Returns 148
- CALIBRATION AND ADJUSTMENT 149
- Adjustment Information 151
- Display/Keypad 155
- Serial Line 156
- Adjusting Temperature 157
- Adjusting Analog Outputs 159
- TECHNICAL DATA 161
- 0604-022 163
- Modules 166
- RS-485 Module 167
- LAN Interface Module 167
- WLAN Interface Module 167
- Data Logger Module 167
- Spare Parts and Accessories 168
- Dimensions (mm/inch) 169
- 92 (3.62) 170
- 116 (4.57) 170
- 183 (7.20) 170
- APPENDIX A 171
- APPENDIX B 173
- ⋅= 68.216 174
- MODBUS REFERENCE 177
- Register Map 178
- 16-Bit Integer Format 179
- Measurement Data (Read-Only) 180
- Status Registers (Read-Only) 181
- Configuration Registers 181
- Exception Status Outputs 182
- Diagnostic Sub-Functions 183
- Exception Responses 184
- *M210762EN* 185
Produits connexes et manuels pour Mesure, test et contrôle Vaisala DRYCAP DMT345
(81 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.033 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels