Vaisala HUMICAP MMT162 Guide de l'utilisateur télécharger pdf (Page 25)

Chapter 4 _________________________________________________________________ Operation

VAISALA ________________________________________________________________________ 23

Installing the Driver for the USB Cable

Before taking the USB cable into use, you must install the provided USB

driver on your PC.

1. Check that the USB cable is not connected. Disconnect the cable if

you have already connected it.

2. Insert the media that came with the cable, or download the driver

from www.vaisala.com.

3. Execute the USB driver installation program and accept the

installation defaults. The installation of the driver may take several

minutes.

4. After the driver has been installed, connect the USB cable to a USB

port on your PC. Windows will detect the new device, and use the

driver automatically.

5. The installation has reserved a COM port for the cable. Verify the

port number, and the status of the cable, using the Vaisala USB

Instrument Finder program that has been installed in the

Windows Start menu.

Windows will recognize each individual cable as a different device, and

reserve a new COM port. Remember to use the correct port in the

settings of your terminal program.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 74 75

Pas de commentaire

Vaisala HUMICAP MMT162 Guide de l'utilisateur Page 25