Vaisala HydroMet Guide de l'utilisateur télécharger pdf (Page 73)

Chapter 3 _______________________________________________________ AWS Client Software

VAISALA_______________________________________________________________________ 71

The fields displayed in the calibration windows and their uses are

outlined in Table 12 on page 71.

Table 12 Fields in the Calibration Windows

Field Description Input

Sensor Sensor name as defined

in the QML logger setup

n/a

Channel Measurement channel

of the sensor

n/a

ID Measurement identifier n/a

Status Sensor status n/a; see Table 13 on page 72.

Offset Offset for the sensors Overwrites the old offset value with

the new one.

Value Last measured sensor

reading shown in

physical units

Overwrites the sensor reading with

the entered value, that is, changes

the offset of the measurement.

Factor Measurement gain for

the sensors.

Overwrites the old gain value with

the new one.

NOTE

New sensor calibration values are taken into use in the QML logger

after a reset with, for example, the Reset command. For further

information on resetting the QML logger, see section Resetting the

QML Logger on page 103.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 159 160

Pas de commentaire

Vaisala HydroMet Guide de l'utilisateur Page 73