Vaisala HUMICAP HMP46 Guide de l'utilisateur télécharger pdf (Page 10)

HMI41 AND PROBES

Operating Manual M210316EN-A

4.65 V, the indicator turns itself off to prevent erroneous measurements and

readings. Should this happen, replace the batteries.

4.2 Measurement readings on display

Relative humidity and temperature readings appear automatically after the

battery charge indication:

°C

If MODE is pressed, dewpoint temperature (Td) reading is displayed:

°C

When MODE is pressed again, one of the following is displayed or the HMI41

returns to showing the RH and T readings according to what has been chosen

for the measurement quantities (see Chapter 8.4):

abs

g/m

°C

Temperature and absolute humidity

°C

Temperature and wet bulb temperature; the

arrow in the lower righthand corner indicates that

wet bulb temperature has been chosen

°C

Temperature and mixing ratio; the arrow in the

lower righthand corner indicates that mixing ratio

has been chosen (the unit is g/kg or gr/lb).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 71 72

Pas de commentaire

Vaisala HUMICAP HMP46 Guide de l'utilisateur Page 10