Vaisala HydroMet Guide de l'utilisateur télécharger pdf (Page 16)

User's Guide ______________________________________________________________________

14 ___________________________________________________________________M210784EN-E

ESD Protection

Electrostatic Discharge (ESD) can cause immediate or latent damage to

electronic circuits. Vaisala products are adequately protected against

ESD for their intended use. However, it is possible to damage the

product by delivering electrostatic discharges when touching,

removing, or inserting any objects inside the equipment housing.

To make sure you are not delivering high static voltages yourself:

- Handle ESD sensitive components on a properly grounded and

protected ESD workbench. When this is not possible, ground

yourself with a wrist strap and a resistive connection cord to the

equipment chassis before touching the boards. When neither of the

above is possible, at least touch a conductive part of the equipment

chassis with your other hand before touching the boards.

- Always hold the boards by the edges and avoid touching the

component contacts.

WARNING

Use only batteries of the same type as originally installed on the

system.

CAUTION

Do not make changes to the wiring. Incorrect wiring can damage the

device and prevent it from operating correctly.

CAUTION

Risk of damage to the equipment if the battery is replaced with an

incorrect type.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 159 160

Pas de commentaire

Vaisala HydroMet Guide de l'utilisateur Page 16