Vaisala BAROCAP PTB330 Guide de l'utilisateur télécharger pdf (Page 56)

USER'S GUIDE____________________________________________________________________

54 __________________________________________________________________ M210855EN-D

Display Settings

Changing Quantities

1. Open the MAIN MENU by pressing any of the arrow buttons.

2. Select Display and press the right arrow button.

3. Select Quantities and press the right arrow button.

4. Select a quantity by using the up/down arrow buttons. Confirm

your choice by pressing the SELECT button. You can select 1

... 4 display quantities at a time. Undo selection by selecting it

and pressing the HIDE button.

5. Press EXIT to return to the basic display.

See Table 2 on page 15 for available quantities.

NOTE

Only the quantities selected for the display are stored in the graphical

history. If a quantity is hidden, it is not stored in the memory of the

barometer for the time being.

NOTE

In order to output P

or A

readings through the serial line, either P

or P

must

be selected for display.

Changing Units

1. Open the MAIN MENU by pressing any of the arrow buttons.

2. Select Display and press the right arrow button.

3. Use the up/down arrow buttons to select Units. Press the right

arrow button.

4. Use the up/down arrow buttons to select display units. Confirm

the selection by pressing CHANGE.

5. Press EXIT to return to the basic display.

NOTE

Changing the display quantities/units (by using the display/keypad)

has no effect on the serial output data.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 143 144

Pas de commentaire

Vaisala BAROCAP PTB330 Guide de l'utilisateur Page 56