Vaisala BAROCAP PTB330 Guide de l'utilisateur télécharger pdf (Page 72)

USER'S GUIDE____________________________________________________________________

70 __________________________________________________________________ M210855EN-D

Setting and testing the analog outputs

AMODE

Displays the analog output mode (if an

AOUT-1 module is connected).

ASEL

Sets the analog output quantity and scaling

(low/high).

ACAL

Adjusts the analog output.

AERR

Sets the analog output error value.

ATEST

Starts/ends an analog output test.

Setting and testing the relays

RSEL

Sets the relay scaling (if a RELAY-1

module is connected).

RTEST

Starts/ends a relay output test.

General Settings

Changing Quantities and Units

NOTE

Only the quantities selected when ordering the device can be selected

as a display output quantity.

FORM

Use the serial line command FORM to change the format or define

quantities for the output command SEND and for RUN mode.

FORM [x]

where:

x = Formatter string

Formatter string consists of quantities and modifiers. When selecting

the quantity, use the abbreviations of the quantities presented in Table

2 on page 15. The modifiers are presented in Table 12 on page 71.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 143 144

Pas de commentaire

Vaisala BAROCAP PTB330 Guide de l'utilisateur Page 72