Vaisala WMS302 Guide de l'utilisateur télécharger pdf (Page 62)

User's Guide ______________________________________________________________________

60 ___________________________________________________________________M210630EN-B

cover at least 5 mm of the outlet. Make sure that the tube is not

blocked or bent during the transportation.

0201-019

Figure 40 Pressure Sensor Tube Connection

4. The internal battery should always be installed when the weather

station is in operation. The battery supplies backup power to the

station and is needed for keeping the time and date information. To

insert the internal battery, you may have to bend battery terminals.

Connect the flat connectors to battery terminals (numbers 1 and 2

in Figure 41 on page 61). Connect the red wire to the positive pole

(+), and the black wire to the negative pole (-). The battery lead(s)

is disconnected during shipping. It is recommended to disconnect

the lead also if the station is not used for several weeks (no

charging). When storing the station for a few days, use SLEEP

command to reduce the power consumption and discharge of the

battery.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 261 262

Pas de commentaire

Vaisala WMS302 Guide de l'utilisateur Page 62