Vaisala WMS302 Guide de l'utilisateur télécharger pdf (Page 80)

User's Guide ______________________________________________________________________

78 ___________________________________________________________________M210630EN-B

Pressure Sensor

The Pressure Sensor PMT16A is located on the CPU board of the

logger, see Figure 63 on page 78. Normally, it is factory installed on the

logger board. If necessary, it can be accessed by removing the cover of

the logger. The sensor is connected directly into the connector on the

board and is fixed on it with one screw.

0201-033

Figure 63 PMT16A Location on the Logger

CAUTION

When handling the sensor, take care not to bent any components on the

transducer board.

CAUTION

Beware of electrostatic discharge when touching objects inside the

logger housing.

CAUTION

Make sure that the vent tube of the pressure sensor is not blocked or

bent during transportation.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 261 262

Pas de commentaire

Vaisala WMS302 Guide de l'utilisateur Page 80