Vaisala HydroMet Guide de l'utilisateur télécharger pdf (Page 121)

Chapter 4 ___________________________________________________________ Troubleshooting

VAISALA______________________________________________________________________ 119

Determining QML Logger Operation Mode

You can watch the status LED to determine the operation mode. The

LED is located on the QML logger board and it is visible through the

logger cover.

Establishing Terminal Connection for

Troubleshooting

See section Establishing Terminal Connection on page 41 and Opening

Service Connection on page 57.

Recording Terminal Connection

Text

In problem situations, you can save the commands and program

responses that you see in the AWS Client terminal connection window.

To capture all the text shown in the terminal window into a file, first

select Settings, then Options, then select the Trace log on option. The

program starts saving all text into a file of format

yyMMddHHmmSS.log, where yy stands for year, MM for month, dd for

day, and so on. The file is stored in the Trace log directory you have

defined in the Options window.

Table 25 Determining Operation Mode by LED Flashing

LED Flashing Interval Operation Mode Note

All the time QML logger has been

reset but setup has not

been examined yet.

Once per 5 seconds Setup is running.

Once per 10 seconds Blank boot or

configuration cannot be

run.

Quickly 2 times Setup is running but

there are warnings.

Interval determined by

setup

Quickly 3 times Setup is running but

there are errors.

Not at all None Check power supply.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 159 160

Pas de commentaire

Vaisala HydroMet Guide de l'utilisateur Page 121