Vaisala HMP228 Guide de l'utilisateur télécharger pdf (Page 30)

User's Guide _______________________________________________________________________

28 ____________________________________________________________________M210498en-A

5. Press SELECT.

6. To set the recording duration, select Duration, press SET.

7. Select the recording duration (1 min, 5 min, 15 min, 30 min, 1 h, 3 h,

12 h, 24 h, 7 d, 30 d, memory full) with arrow buttons and press

SELECT.

8. Start recording: select Start/Stop recording, press START. If you chose

'Memory full', you see the maximum recording time on the display.

You can also delete files in order to empty the memory. Press

START again to accept maximum recording time.

9. You can switch the MM70 off during recording to save battery.

Display message tells you that recording continues undisturbed even

when power is off. If the indicator is switched off during recording,

the progress bar

is shown on the display every 10 seconds (all

the time, if charger is connected). This bar shows the amount of

recorded data.

CAUTION

Do not disconnect the probe when the data recording is on,

even if the indicator is off. This may cause loss of recorded

data.

Stopping recording

1. To stop recording press Record, select Record data and press ,

select

Start/Stop recording and press STOP.

2. Now you can go and see the recorded file by selecting SHOW.

You can save individual measurement data points with

Hold/Save function

described in page 22.

Viewing recorded data

1. Open the MENU: press OPEN .

2. Select Recording/Viewing, press .

3. Select View recorded data, press .

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 56 57

Pas de commentaire

Vaisala HMP228 Guide de l'utilisateur Page 30