Vaisala HMP260 SERIES Manuel de service télécharger pdf (Page 33)

HMP260 SERIES

HMP260-U017en-1.5 Operating Manual

1997-11-25 27

Selecting stop bits:

Full duplex/half duplex:

The processor does not allow the following combinations:

• no parity, 7 data bits, 1 stop bit: if this combination is given the

HMP260 programme will change the number of stop bits to 2

• even or odd parity, 8 data bits, 2 stop bits: if this combination is given

the programme changes the number of stop bits to 1

NOTE

The serial bus settings become effective only after reset.

5.3.5.3 Setting the transmitter address

Address is used when more than one transmitters are connected to one serial

bus; this way, it is possible to communicate with one transmitter at a time.

• Select Addr in the main menu; the following is displayed:

• Pressing ENT returns the programme to the main menu.

• Pressing CL deletes the old address; enter the new address with the

arrow keys.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 117 118

Pas de commentaire

Vaisala HMP260 SERIES Manuel de service Page 33