Vaisala DRYCAP DMT346 Guide de l'utilisateur télécharger pdf (Page 40)

User's Guide _______________________________________________________________________

38 ___________________________________________________________________ M210762EN-A

4. Bend over the screen braiding or screen foil by about 90º

(item 4).

5. Push the seal insert with the contact socket of the gland

(items 2 & 3) up to the screen braiding or screen foil.

6. Mount lower part (item 5) on the housing

7. Push the seal with the contact socket of the gland and

(item 2 & 3) flush into the lower part (item 5).

8. Screw the domed cap nut (item 1) onto the lower part (item 5).

Transmitter Housing Grounding

In case you need to ground the transmitter housing, the grounding

connector is found inside the housing (see Figure 1 on page 18) Note

anyhow that the probe head is connected to the same potential as the

housing. Make sure that different groundings are made to the same

potential. Otherwise harmful ground currents may be generated.

If it is needed to have galvanic isolation of the power supply line from

the output signals, DMT346 can be ordered with optional output

isolation module. This module prevents harmful grounding loops.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 145 146

Pas de commentaire

Vaisala DRYCAP DMT346 Guide de l'utilisateur Page 40