Vaisala WXT520 Guide de l'utilisateur Page 164

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 171
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 163
User’s Guide ______________________________________________________________________
162 _________________________________________________________________ M210906EN-C
Encoding the CRC as ASCII Characters
The 16 bit CRC is encoded to three ASCII characters by using the
following algorithm:
1st character = 0x40 OR (CRC shifted right 12 bits)
2nd character = 0x40 OR ((CRC shifted right 6 bits) AND 0x3F)
3rd character = 0x40 OR (CRC AND 0x3F)
The three ASCII characters are placed between the data and <cr><lf>.
Parity is applied to all three characters, if selected for the character
frame.
The CRC computation code is added to the end of the response, if the
first letter of the command is sent by using lower case.
NMEA 0183 v3.0 Checksum Computation
The checksum is the last field in the NMEA sentence and follows the
checksum delimiter character "*". It is the 8-bit exclusive OR of all
characters in the sentence, including "," and "^" delimiters, between but
not including the "$" or "!" and the "*" delimiters. The hexadecimal
value of the most significant and least significant four bits of the result
is converted to two ASCII characters (0-9,A-F) for transmission. The
most significant character is transmitted first.
Vue de la page 163

Commentaires sur ces manuels

Pas de commentaire