
Chapter 4 _______________________________________________________________ Installation
VAISALA_______________________________________________________________________ 37
Mounting To Horizontal Cross Arm
1. Remove the screw cover.
2. Align the horizontal cross arm in south-north-direction, see
Aligning WXT520 on page 41. In case the cross arm cannot be
aligned, make the wind direction offset as instructed in section
Wind Direction Offset on page 42.
3. Mount the transmitter into the cross arm by using a mounting bolt
(M6 DIN933) and a nut, see Figure 14 on page 37 and Figure 15 on
page 38.
0803-032
Figure 14 Mounting WXT520 to Cross Arm (L-Profile)
The following numbers refer to Figure 14 on page 37:
1 = Nut (M6 DIN934)
2 = Mounting bolt (M6 DIN933)
Commentaires sur ces manuels