Vaisala DRYCAP DMT340 SERIES Guide de l'utilisateur télécharger pdf (Page 106)

USER'S GUIDE____________________________________________________________________

106 _________________________________________________________________ M210704EN-E

INTV

Use the command INTV[xxx yyy] to set the outputting interval for the

RUN mode.

where

xxx

= Output inverval (0 ... 255). 0: the fastest possible output rate.

= Unit (s, min or h)

Example:

>INTV 10 min

Output intrv. : 10 min

ECHO

Use the command ECHO [x] to set the user port echo. The command

either enables or disables echo of characters received.

ECHO [x]

where

x = ON (default) or

= OFF

NOTE

You can use the SERI, SMODE, INTV and ECHO commands to

change/view the user port settings even if you are currently connected to

the service port.

Data Filtering

The averaging data filter calculates a average over a certain period of

time. The lowest measurement noise is achieved with the extended

filtering. There are three filtering levels available.

Table 29 Filtering Levels

Setting Filtering level

OFF No filtering

ON (default) Standard = short filtering (about 15 s moving average)

EXTENDED Extended filtering (default: 1 min average)

Use display/keypad to set the filtering level.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 168 169

Pas de commentaire

Vaisala DRYCAP DMT340 SERIES Guide de l'utilisateur Page 106