Vaisala DRYCAP DMT340 SERIES Guide de l'utilisateur télécharger pdf (Page 136)

USER'S GUIDE____________________________________________________________________

136 _________________________________________________________________ M210704EN-E

Error States

In error state the quantity is not measured and the output is shown as

follows:

- analog channel outputs 0 mA or 0 V (you can use the serial line

command AERR or display/keypad to change this fault indication

value, see section Analog Output Fault Indication Setting on page

119)

- the serial port outputs stars (***)

- the cover LED is blinking

- optional display: error indicator is lit.

- The error indicator disappears when the error state is over and you

have checked the error message. Press the INFO button to display

the error message.

0706-017

Figure 73 Error Indicator and Error Message

Number refers to Figure 73 above:

1 = Error Indicator

You can also check the error message via the serial interface by using the

command ERRS. In case of constant error, please contact the Vaisala

Service Centers (contact information on page 139).

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 168 169

Pas de commentaire

Vaisala DRYCAP DMT340 SERIES Guide de l'utilisateur Page 136