Vaisala PTB210 SERIES Manuel d'instructions télécharger pdf (Page 124)

BGC-FTIR | Programming 39

1.3.3 Programming

To modify any parameter via FTP the basic need is to access the ﬁle system

of the datalogger. You can do so by opening a standard browser and using the

following FTP-Adress:

ftp://UserName:Password@IP

• User Name = BGCJena

• Password = ftp

• IP Adress = 10.3.9.60

Now you can access the ﬁles on the CPU and the CF-Card by selecting the

appropriate folder. You can also access with the CR1000KD. In that case

you don’t need a PC or a connection to the local network of the BGC-FTIR-

Container.

Multiplier and Oﬀsets

To modify a multiplier or an oﬀset you have to open the ﬁle Const.CR1 on

the CF-Card of the Datalogger CR1000. Actually there are two possibilities

to make the ﬁle accessible. The ﬁrst is to use the keyboard display CR1000KD.

1. Select "Home", background light should ﬂash.

2. Select "File", conﬁrm with "Enter".

3. Select "Edit", conﬁrm with "Enter".

4. Select "Crd", conﬁrm with "Enter" to access CF-Card.

5. Select "Const.CR1", conﬁrm with "Enter".

6. Search for the parameter which should be modiﬁed.

7. Press "NumLock" for activating the edit-modus, enter the value.

8. Exit with "Esc", conﬁrm settings.

NOTE: Don’t forget to power up the Dalalogger CR1000 to activate the new

seetings.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 136 137

Pas de commentaire

Vaisala PTB210 SERIES Manuel d'instructions Page 124